建站
咨詢
售后
建站咨詢
新聞中心
on linux Systems
創新互聯專業為企業提供黃州網站建設、黃州做網站、黃州網站設計、黃州網站制作等企業網站建設、網頁設計與制作、黃州企業網站模板建站服務，10年黃州做網站經驗，不只是建網站，更提供有價值的思路和整體網絡服務。
Linux, an open-source operating system, is widely used in servers, embedded systems, and mobile devices. For security reasons, it is important to configure the FIREWALL properly and keep it activated. However, if you need to control access to the system using a different tool, or if you need to disable the firewall to troubleshoot network issues, it is necessary to know how to turn off the firewall on Linux systems.
1. Stop the Firewall
The first step when disabling Linux’s firewall is to stop the service. For most distributions, the firewall is managed by Systemd, meaning the systemctl command can be used. Depending on the Linux distribution, you can use either the iptables or firewalld service. In the case of iptables, the service can be stopped with the following command:
sudo systemctl stop iptables
Where as for firewalld:
sudo systemctl stop firewalld
2. Disable the Firewall
Once the service is stopped, it is necessary to disable the firewall so that it doesn’t restart automatically. Specifically, you must stop the service from starting automatically by running the next command:
sudo systemctl disable iptables
The same command can be used for firewalld. Additionally, if you are using, for example, iptables, you can clear the rules that are currently enabled. To do this, run the commands:
sudo iptables -F
sudo iptables -X
sudo iptables -t nat -F
sudo iptables -t nat -X
sudo iptables -t mangle -F
sudo iptables -t mangle -X
sudo iptables -P INPUT ACCEPT
sudo iptables -P OUTPUT ACCEPT
sudo iptables -P FORWARD ACCEPT
3. Check the Firewall Status
To make sure the firewall is actually disabled, you can check its current status with the command:
sudo systemctl status iptables
This should return the message “active (exited).” This means that the firewall is disabled and not running. If the message isn’t “active (exited),” then the firewall didn’t stop or disable properly.
Conclusion
It is important to keep the Linux system’s firewall active at all times, however there are certain scenarios where it is necessary to disable the firewall. It is important to understand how to turn off Linux’s firewall in such scenarios. This can be done with the Systemctl command, and be double checked that it is actually disabled.
成都創新互聯科技公司主營:網站設計、網站建設、小程序制作、成都軟件開發、網頁設計、微信開發、成都小程序開發、網站制作、網站開發等業務，是專業的成都做小程序公司、成都網站建設公司、成都做網站的公司。創新互聯公司集小程序制作創意，網站制作策劃，畫冊、網頁、VI設計，網站、軟件、微信、小程序開發于一體。
網頁名稱：Linux系統：關閉防火墻（關閉linux的防火墻）
分享網址：http://www.fisionsoft.com.cn/article/cdcijie.html
