Containerd深度剖析-CRI篇

作者：段全峰 2023-01-10 13:48:50

云計算

云原生 本文就針對K8s使用Containerd作為運行時的整個調用鏈進行介紹和源碼級別的分析。

創新互聯主營臨潼網站建設的網絡公司,主營網站建設方案,成都app軟件開發公司,臨潼h5小程序定制開發搭建,臨潼網站營銷推廣歡迎臨潼等地區企業咨詢

本文經DCOS（公眾號 ID: indagate）授權轉載，轉載請聯系出處。

撰文 ｜ 段全鋒

編輯 ｜ zouyee

段全鋒: 軟件工程師，熟悉K8s架構、精通Runtime底層技術細節等。

目前我司現網的K8s集群的運行時已經完成從docker到Containerd的切換，有小伙伴對K8s與Containerd調用鏈涉及的組件不了解，其中Containerd和RunC是什么關系，docker和containerd又有什么區別，以及K8s調用Containerd創建容器又是怎樣的流程，最終RunC又是如何創建容器的，諸如此類的疑問。本文就針對K8s使用Containerd作為運行時的整個調用鏈進行介紹和源碼級別的分析。

其中關于kubelet與運行時的分層架構圖可以參看下圖：

那么關于各類運行時的介紹可以參看Containerd深度剖析-runtime篇

一、“運行時簡介”

容器運行時意思就是能夠管理容器運行的整個生命周期，具體一點就是如何制作容器的鏡像、容器鏡像格式是什么樣子的、管理容器的鏡像、容器鏡像的分發、如何運行一個容器以及管理創建的容器實例等等。

容器運行時有一個行業標準叫做OCI規范，這個規范分成兩部分：

a. 容器運行時規范：描述了如何通過一個bundle運行容器，bundle就是一個目錄，里面包括一個容器的規格文 件，文件叫config.json 和一個rootfs，rootfs中包含了一個容器運行時所需操作系統的文件。

b. 容器鏡像規范：定義了容器的鏡像如何打包如何將鏡像轉換成一個bundle。

的老爺子，考慮是新冠肺炎轉成重癥。雖然意識還比較清醒，但血氣分析結果很差，需要住進ICU進行呼吸監護。從普通病房轉運至ICU，坐電梯上幾層樓就能到，但如果給氧條件不夠，風險會非常大。他的妻女想見老爺子一面、說說話，怕以后再也見不到了。

目前流行將運行時分成low-level運行時和high-level運行時，low-level運行時專注于如何創建一個容器例如runc和kata，high-level包含了更多上層功能，比如鏡像管理，以docker和containerd為代表。

K8s的kubelet是調用容器運行時創建容器的，但是容器運行時這么多不可能逐個兼容，K8s在對接容器運行時定義了CRI接口，容器運行時只需實現該接口就能被使用。下圖分別是k8s使用docker和containerd的調用鏈，使用containerd時CRI接口是在containerd代碼中實現的；使用docker時的CRI接口是在k8s的代碼中實現的，叫做docker-shim(kubernetes/pkg/kubelet/dockershim/docker_service.go)，這部分代碼在k8s代碼中是歷史原因，當時docker是容器方面行業事實上的標準，但隨著越來越多運行時實現了CRI支持，docker-shim的維護日益變成社區負擔，在最新的K8s版本中，該部分代碼目前已經移出，暫時由mirantis進行維護，下圖是插件的發展歷程。

二、“Containerd CRI簡介”

Containerd是一個行業標準的容器運行時，它是一個daemon進程，可以管理主機上容器的全部生命周期和它的文件系統，包括：鏡像的分發和存儲、容器的運行和監控，底層的存儲和網絡。

Containerd有多種客戶端，比如K8s、docker等，為了不同客戶端的容器或者鏡像能隔離開，Containerd中有namespace概念，默認情況下docker的namespace是moby，K8s的是k8s.io。

container在Containerd中代表的是一個容器的元數據，containerd中的Task用于獲取容器對象并將它轉換成在操作系統中可運行的進程，它代表的就是容器中可運行的對象。

Containerd內部的cri模塊實現K8s的CRI接口，所以K8s的kubelet可以直接使用containerd。CRI的接口包括：RuntimeService 和 ImageService

// Runtime service defines the public APIs for remote container runtimes
service RuntimeService {
  // Version returns the runtime name, runtime version, and runtime API version.
  rpc Version(VersionRequest) returns (VersionResponse) {}

  // RunPodSandbox creates and starts a pod-level sandbox. Runtimes must ensure
  // the sandbox is in the ready state on success.
  rpc RunPodSandbox(RunPodSandboxRequest) returns (RunPodSandboxResponse) {}
  // StopPodSandbox stops any running process that is part of the sandbox and
  // reclaims network resources (e.g., IP addresses) allocated to the sandbox.
  // If there are any running containers in the sandbox, they must be forcibly
  // terminated.
  // This call is idempotent, and must not return an error if all relevant
  // resources have already been reclaimed. kubelet will call StopPodSandbox
  // at least once before calling RemovePodSandbox. It will also attempt to
  // reclaim resources eagerly, as soon as a sandbox is not needed. Hence,
  // multiple StopPodSandbox calls are expected.
  rpc StopPodSandbox(StopPodSandboxRequest) returns (StopPodSandboxResponse) {}
  // RemovePodSandbox removes the sandbox. If there are any running containers
  // in the sandbox, they must be forcibly terminated and removed.
  // This call is idempotent, and must not return an error if the sandbox has
  // already been removed.
  rpc RemovePodSandbox(RemovePodSandboxRequest) returns (RemovePodSandboxResponse) {}
  // PodSandboxStatus returns the status of the PodSandbox. If the PodSandbox is not
  // present, returns an error.
  rpc PodSandboxStatus(PodSandboxStatusRequest) returns (PodSandboxStatusResponse) {}
  // ListPodSandbox returns a list of PodSandboxes.
  rpc ListPodSandbox(ListPodSandboxRequest) returns (ListPodSandboxResponse) {}

  // CreateContainer creates a new container in specified PodSandbox
  rpc CreateContainer(CreateContainerRequest) returns (CreateContainerResponse) {}
  // StartContainer starts the container.
  rpc StartContainer(StartContainerRequest) returns (StartContainerResponse) {}
  // StopContainer stops a running container with a grace period (i.e., timeout).
  // This call is idempotent, and must not return an error if the container has
  // already been stopped.
  // The runtime must forcibly kill the container after the grace period is
  // reached.
  rpc StopContainer(StopContainerRequest) returns (StopContainerResponse) {}
  // RemoveContainer removes the container. If the container is running, the
  // container must be forcibly removed.
  // This call is idempotent, and must not return an error if the container has
  // already been removed.
  rpc RemoveContainer(RemoveContainerRequest) returns (RemoveContainerResponse) {}
  // ListContainers lists all containers by filters.
  rpc ListContainers(ListContainersRequest) returns (ListContainersResponse) {}
  // ContainerStatus returns status of the container. If the container is not
  // present, returns an error.
  rpc ContainerStatus(ContainerStatusRequest) returns (ContainerStatusResponse) {}
  // UpdateContainerResources updates ContainerConfig of the container synchronously.
  // If runtime fails to transactionally update the requested resources, an error is returned.
  rpc UpdateContainerResources(UpdateContainerResourcesRequest) returns (UpdateContainerResourcesResponse) {}
  // ReopenContainerLog asks runtime to reopen the stdout/stderr log file
  // for the container. This is often called after the log file has been
  // rotated. If the container is not running, container runtime can choose
  // to either create a new log file and return nil, or return an error.
  // Once it returns error, new container log file MUST NOT be created.
  rpc ReopenContainerLog(ReopenContainerLogRequest) returns (ReopenContainerLogResponse) {}

  // ExecSync runs a command in a container synchronously.
  rpc ExecSync(ExecSyncRequest) returns (ExecSyncResponse) {}
  // Exec prepares a streaming endpoint to execute a command in the container.
  rpc Exec(ExecRequest) returns (ExecResponse) {}
  // Attach prepares a streaming endpoint to attach to a running container.
  rpc Attach(AttachRequest) returns (AttachResponse) {}
  // PortForward prepares a streaming endpoint to forward ports from a PodSandbox.
  rpc PortForward(PortForwardRequest) returns (PortForwardResponse) {}

  // ContainerStats returns stats of the container. If the container does not
  // exist, the call returns an error.
  rpc ContainerStats(ContainerStatsRequest) returns (ContainerStatsResponse) {}
  // ListContainerStats returns stats of all running containers.
  rpc ListContainerStats(ListContainerStatsRequest) returns (ListContainerStatsResponse) {}

  // PodSandboxStats returns stats of the pod sandbox. If the pod sandbox does not
  // exist, the call returns an error.
  rpc PodSandboxStats(PodSandboxStatsRequest) returns (PodSandboxStatsResponse) {}
  // ListPodSandboxStats returns stats of the pod sandboxes matching a filter.
  rpc ListPodSandboxStats(ListPodSandboxStatsRequest) returns (ListPodSandboxStatsResponse) {}

  // UpdateRuntimeConfig updates the runtime configuration based on the given request.
  rpc UpdateRuntimeConfig(UpdateRuntimeConfigRequest) returns (UpdateRuntimeConfigResponse) {}

  // Status returns the status of the runtime.
  rpc Status(StatusRequest) returns (StatusResponse) {}
}

// ImageService defines the public APIs for managing images.
service ImageService {
  // ListImages lists existing images.
  rpc ListImages(ListImagesRequest) returns (ListImagesResponse) {}
  // ImageStatus returns the status of the image. If the image is not
  // present, returns a response with ImageStatusResponse.Image set to
  // nil.
  rpc ImageStatus(ImageStatusRequest) returns (ImageStatusResponse) {}
  // PullImage pulls an image with authentication config.
  rpc PullImage(PullImageRequest) returns (PullImageResponse) {}
  // RemoveImage removes the image.
  // This call is idempotent, and must not return an error if the image has
  // already been removed.
  rpc RemoveImage(RemoveImageRequest) returns (RemoveImageResponse) {}
  // ImageFSInfo returns information of the filesystem that is used to store images.
  rpc ImageFsInfo(ImageFsInfoRequest) returns (ImageFsInfoResponse) {}
}

kubelet調用CRI接口創建一個包含A和B兩個業務container的Pod流程如下所示：

① 為Pod創建sandbox

② 創建container A

③ 啟動container A

④ 創建container B

⑤ 啟動container B

三、“Containerd CRI實現”

RunPodSandbox

RunPodSandbox的流程如下：

① 拉取sandbox的鏡像，在containerd中配置

② 獲取創建pod要使用的runtime，可以在創建pod的yaml中指定，如果沒指定使用containerd中默認的

（runtime在containerd中配置）

③ 如果pod不是hostNetwork那么添加創建新net namespace，并使用cni插件設置網絡（criService在初始化時會加載containerd中cri指定的插件信息）

④ 調用containerd客戶端創建一個container

⑤ 在rootDir/io.containerd.grpc.v1.cri/sandboxes下為當前pod以pod Id為名創建一個目錄

（pkg/cri/cri.go）

⑥ 根據選擇的runtime為sandbox容器創建task

⑦ 啟動sandbox容器的task，將sandbox添加到數據庫中

代碼在containerd/pkg/cri/server/sanbox_run.go 中

// RunPodSandbox creates and starts a pod-level sandbox. Runtimes should ensure
// the sandbox is in ready state.
func (c *criService) RunPodSandbox(ctx context.Context, r *runtime.RunPodSandboxRequest) (_ *runtime.RunPodSandboxResponse, retErr error) {
  config := r.GetConfig()
  log.G(ctx).Debugf("Sandbox config %+v", config)

  // Generate unique id and name for the sandbox and reserve the name.
  id := util.GenerateID()
  metadata := config.GetMetadata()
  if metadata == nil {
    return nil, errors.New("sandbox config must include metadata")
  }
  name := makeSandboxName(metadata)
  log.G(ctx).WithField("podsandboxid", id).Debugf("generated id for sandbox name %q", name)

  // cleanupErr records the last error returned by the critical cleanup operations in deferred functions,
  // like CNI teardown and stopping the running sandbox task.
  // If cleanup is not completed for some reason, the CRI-plugin will leave the sandbox
  // in a not-ready state, which can later be cleaned up by the next execution of the kubelet's syncPod workflow.
  var cleanupErr error

  // Reserve the sandbox name to avoid concurrent `RunPodSandbox` request starting the
  // same sandbox.
  if err := c.sandboxNameIndex.Reserve(name, id); err != nil {
    return nil, fmt.Errorf("failed to reserve sandbox name %q: %w", name, err)
  }
  defer func() {
    // Release the name if the function returns with an error.
    // When cleanupErr != nil, the name will be cleaned in sandbox_remove.
    if retErr != nil && cleanupErr == nil {
      c.sandboxNameIndex.ReleaseByName(name)
    }
  }()

  var (
    err         error
    sandboxInfo = sb.Sandbox{ID: id}
  )

  ociRuntime, err := c.getSandboxRuntime(config, r.GetRuntimeHandler())
  if err != nil {
    return nil, fmt.Errorf("unable to get OCI runtime for sandbox %q: %w", id, err)
  }

  sandboxInfo.Runtime.Name = ociRuntime.Type

  // Retrieve runtime options
  runtimeOpts, err := generateRuntimeOptions(ociRuntime, c.config)
  if err != nil {
    return nil, fmt.Errorf("failed to generate sandbox runtime options: %w", err)
  }

  ...

  // Create initial internal sandbox object.
  sandbox := sandboxstore.NewSandbox(
    ...
  )

  if _, err := c.client.SandboxStore().Create(ctx, sandboxInfo); err != nil {
    return nil, fmt.Errorf("failed to save sandbox metadata: %w", err)
  }
 
  ...

  // Setup the network namespace if host networking wasn't requested.
  if !hostNetwork(config) {
    netStart := time.Now()
    // If it is not in host network namespace then create a namespace and set the sandbox
    // handle. NetNSPath in sandbox metadata and NetNS is non empty only for non host network
    // namespaces. If the pod is in host network namespace then both are empty and should not
    // be used.
    var netnsMountDir = "/var/run/netns"
    if c.config.NetNSMountsUnderStateDir {
      netnsMountDir = filepath.Join(c.config.StateDir, "netns")
    }
    sandbox.NetNS, err = netns.NewNetNS(netnsMountDir)
    if err != nil {
      return nil, fmt.Errorf("failed to create network namespace for sandbox %q: %w", id, err)
    }
    // Update network namespace in the store, which is used to generate the container's spec
    sandbox.NetNSPath = sandbox.NetNS.GetPath()
    defer func() {
      // Remove the network namespace only if all the resource cleanup is done
      if retErr != nil && cleanupErr == nil {
        if cleanupErr = sandbox.NetNS.Remove(); cleanupErr != nil {
          log.G(ctx).WithError(cleanupErr).Errorf("Failed to remove network namespace %s for sandbox %q", sandbox.NetNSPath, id)
          return
        }
        sandbox.NetNSPath = ""
      }
    }()

    if err := sandboxInfo.AddExtension(podsandbox.MetadataKey, &sandbox.Metadata); err != nil {
      return nil, fmt.Errorf("unable to save sandbox %q to store: %w", id, err)
    }
    // Save sandbox metadata to store
    if sandboxInfo, err = c.client.SandboxStore().Update(ctx, sandboxInfo, "extensions"); err != nil {
      return nil, fmt.Errorf("unable to update extensions for sandbox %q: %w", id, err)
    }

    // Define this defer to teardownPodNetwork prior to the setupPodNetwork function call.
    // This is because in setupPodNetwork the resource is allocated even if it returns error, unlike other resource
    // creation functions.
    defer func() {
      // Remove the network namespace only if all the resource cleanup is done.
      if retErr != nil && cleanupErr == nil {
        deferCtx, deferCancel := ctrdutil.DeferContext()
        defer deferCancel()
        // Teardown network if an error is returned.
        if cleanupErr = c.teardownPodNetwork(deferCtx, sandbox); cleanupErr != nil {
          log.G(ctx).WithError(cleanupErr).Errorf("Failed to destroy network for sandbox %q", id)
        }

      }
    }()

    // Setup network for sandbox.
    // Certain VM based solutions like clear containers (Issue containerd/cri-containerd#524)
    // rely on the assumption that CRI shim will not be querying the network namespace to check the
    // network states such as IP.
    // In future runtime implementation should avoid relying on CRI shim implementation details.
    // In this case however caching the IP will add a subtle performance enhancement by avoiding
    // calls to network namespace of the pod to query the IP of the veth interface on every
    // SandboxStatus request.
    if err := c.setupPodNetwork(ctx, &sandbox); err != nil {
      return nil, fmt.Errorf("failed to setup network for sandbox %q: %w", id, err)
    }
    sandboxCreateNetworkTimer.UpdateSince(netStart)
  }

  if err := sandboxInfo.AddExtension(podsandbox.MetadataKey, &sandbox.Metadata); err != nil {
    return nil, fmt.Errorf("unable to save sandbox %q to store: %w", id, err)
  }

  controller, err := c.getSandboxController(config, r.GetRuntimeHandler())
  if err != nil {
    return nil, fmt.Errorf("failed to get sandbox controller: %w", err)
  }

  // Save sandbox metadata to store
  if sandboxInfo, err = c.client.SandboxStore().Update(ctx, sandboxInfo, "extensions"); err != nil {
    return nil, fmt.Errorf("unable to update extensions for sandbox %q: %w", id, err)
  }

  runtimeStart := time.Now()

  if err := controller.Create(ctx, id); err != nil {
    return nil, fmt.Errorf("failed to create sandbox %q: %w", id, err)
  }

  resp, err := controller.Start(ctx, id)
  if err != nil {
    sandbox.Container, _ = c.client.LoadContainer(ctx, id)
    if resp != nil && resp.SandboxID == "" && resp.Pid == 0 && resp.CreatedAt == nil && len(resp.Labels) == 0 {
      // if resp is a non-nil zero-value, an error occurred during cleanup
      cleanupErr = fmt.Errorf("failed to cleanup sandbox")
    }
    return nil, fmt.Errorf("failed to start sandbox %q: %w", id, err)
  }

  // TODO: get rid of this. sandbox object should no longer have Container field.
  if ociRuntime.SandboxMode == string(criconfig.ModePodSandbox) {
    container, err := c.client.LoadContainer(ctx, id)
    if err != nil {
      return nil, fmt.Errorf("failed to load container %q for sandbox: %w", id, err)
    }
    sandbox.Container = container
  }

  labels := resp.GetLabels()
  if labels == nil {
    labels = map[string]string{}
  }

  sandbox.ProcessLabel = labels["selinux_label"]

  if err := sandbox.Status.Update(func(status sandboxstore.Status) (sandboxstore.Status, error) {
    // Set the pod sandbox as ready after successfully start sandbox container.
    status.Pid = resp.Pid
    status.State = sandboxstore.StateReady
    status.CreatedAt = protobuf.FromTimestamp(resp.CreatedAt)
    return status, nil
  }); err != nil {
    return nil, fmt.Errorf("failed to update sandbox status: %w", err)
  }

  // Add sandbox into sandbox store in INIT state.
  if err := c.sandboxStore.Add(sandbox); err != nil {
    return nil, fmt.Errorf("failed to add sandbox %+v into store: %w", sandbox, err)
  }

  // Send CONTAINER_CREATED event with both ContainerId and SandboxId equal to SandboxId.
  // Note that this has to be done after sandboxStore.Add() because we need to get
  // SandboxStatus from the store and include it in the event.
  c.generateAndSendContainerEvent(ctx, id, id, runtime.ContainerEventType_CONTAINER_CREATED_EVENT)

  // start the monitor after adding sandbox into the store, this ensures
  // that sandbox is in the store, when event monitor receives the TaskExit event.
  //
  // TaskOOM from containerd may come before sandbox is added to store,
  // but we don't care about sandbox TaskOOM right now, so it is fine.
  go func() {
    resp, err := controller.Wait(ctrdutil.NamespacedContext(), id)
    if err != nil {
      log.G(ctx).WithError(err).Error("failed to wait for sandbox controller, skipping exit event")
      return
    }

    e := &eventtypes.TaskExit{
      ContainerID: id,
      ID:          id,
      // Pid is not used
      Pid:        0,
      ExitStatus: resp.ExitStatus,
      ExitedAt:   resp.ExitedAt,
    }
    c.eventMonitor.backOff.enBackOff(id, e)
  }()

  // Send CONTAINER_STARTED event with ContainerId equal to SandboxId.
  c.generateAndSendContainerEvent(ctx, id, id, runtime.ContainerEventType_CONTAINER_STARTED_EVENT)

  sandboxRuntimeCreateTimer.WithValues(labels["oci_runtime_type"]).UpdateSince(runtimeStart)

  return &runtime.RunPodSandboxResponse{PodSandboxId: id}, nil
}

CreateContainer

CreateContainer在指定的PodSandbox中創建一個新的container元數據，流程如下：

① 獲取容器的sandbox信息

② 為容器要用的鏡像初始化鏡像handler

③ 為容器在rootDir/io.containerd.grpc.v1.cri目錄下以容器Id命名的目錄

④ 從sandbox中獲取所使用的runtime

⑤ 為容器創建containerSpec

⑥ 使用containerd客戶端創建container

⑦ 保存container的信息

代碼見containerd/pkg/cri/server/container_create.go 下面是省略過的代碼。

func (c *criService) CreateContainer(ctx context.Context, r
*runtime.CreateContainerRequest) (_ *runtime.CreateContainerResponse, retErr error) { 

    sandbox, err := c.sandboxStore.Get(r.GetPodSandboxId())
    s, err := sandbox.Container.Task(ctx, nil) 
    sandboxPid := s.Pid()
    image, err := c.localResolve(config.GetImage().GetImage()) 
    if err != nil {
        return nil, errors.Wrapf(err, "failed to resolve image %q", config.GetImage().GetImage())
    }
    containerdImage, err := c.toContainerdImage(ctx, image)
    // Run container using the same runtime with sandbox.
    sandboxInfo, err := sandbox.Container.Info(ctx) 
    if err != nil {
        return nil, errors.Wrapf(err, "failed to get sandbox %q info", sandboxID)
    }

// Create container root directory. containerRootDir := c.getContainerRootDir(id)
    if err = c.os.MkdirAll(containerRootDir, 0755)? err != nil {
        return nil, errors.Wrapf(err, "failed to create container root directory %q", containerRootDir)
    }
    ociRuntime, err := c.getSandboxRuntime(sandboxConfig, sandbox.Metadata.RuntimeHandler) 
    if err != nil {
        return nil, errors.Wrap(err, "failed to get sandbox runtime")
    }

    spec, err := c.containerSpec(id, sandboxID, sandboxPid, sandbox.NetNSPath, containerName, containerdImage.Name(), config, sandboxConfig,
&image.ImageSpec.Config, append(mounts, volumeMounts...), ociRuntime) 
    if err != nil {
        return nil, errors.Wrapf(err, "failed to generate container %q spec", id)
    }
    opts = append(opts, containerd.WithSpec(spec, specOpts...),
containerd.WithRuntime(sandboxInfo.Runtime.Name, runtimeOptions), containerd.WithContainerLabels(containerLabels), containerd.WithContainerExtension(containerMetadataExtension, &meta))
    var cntr containerd.Container
     if cntr, err = c.client.NewContainer(ctx, id, opts...)? err != nil { 
         return nil, errors.Wrap(err, "failed to create containerd container")
    }
// Add container into container store.
    if err := c.containerStore.Add(container)? err != nil {
      return nil, errors.Wrapf(err, "failed to add container %q into store", id)
    }
}

StartContainer

StartContainer用于啟動一個容器，流程如下：

① 讀取保存的container元數據

② 讀取關聯的sandbox信息

③ 為容器創建task

④ 啟動task

代碼見containerd/pkg/cri/server/container_start.go ，下面是該部分省略過后的代碼：

func (c *criService) StartContainer(ctx context.Context, r *runtime.StartContainerRequest) (retRes *runtime.StartContainerResponse, retErr error) {

    cntr, err := c.containerStore.Get(r.GetContainerId())
   // Get sandbox config from sandbox store. sandbox, err := c.sandboxStore.Get(meta.SandboxID) ctrInfo, err := container.Info(ctx)
    if err != nil {
        return nil, errors.Wrap(err, "failed to get container info")
    }

    taskOpts := c.taskOpts(ctrInfo.Runtime.Name)
    task, err := container.NewTask(ctx, ioCreation, taskOpts...) 
    if err != nil {
        return nil, errors.Wrap(err, "failed to create containerd task")
      }
    // wait is a long running background request, no timeout needed. exitCh, err := task.Wait(ctrdutil.NamespacedContext())
    // Start containerd task.
    if err := task.Start(ctx)? err != nil {
        return nil, errors.Wrapf(err, "failed to start containerd task %q", id)
     }
}

創建task的代碼如下，調用了containerd的客戶端的TasksClient，向服務器端發送創建task的請求

func (c *container) NewTask(ctx context.Context, ioCreate cio.Creator, opts
...NewTaskOpts) (_ Task, err error) {
    ......
    request := &tasks.CreateTaskRequest{ 
                  ContainerID: c.id,
                  Terminal:  cfg.Terminal, Stdin:  cfg.Stdin,
                  Stdout:  cfg.Stdout,
                  Stderr:  cfg.Stderr,
                }
     ......
     response, err := c.client.TaskService().Create(ctx, request)
     ......

task啟動的代碼如下，調用了containerd的客戶端的TasksClient，向服務器端發送啟動task的請求。

func (t *task) Start(ctx context.Context) error {
  r, err := t.client.TaskService().Start(ctx, &tasks.StartRequest{
    ContainerID: t.id,
  })
  if err != nil {
    if t.io != nil {
      t.io.Cancel()
      t.io.Close()
    }
    return errdefs.FromGRPC(err)
  }
  t.pid = r.Pid
  return nil
}

四、“Task Service”

Task Service創建task流程

下面是tasks-service處理創建task請求的代碼，根據容器運行時創建容器。

func (l *local) Create(ctx context.Context, r *api.CreateTaskRequest, _
...grpc.CallOption) (*api.CreateTaskResponse, error) { container, err := l.getContainer(ctx, r.ContainerID)
......
    rtime, err := l.getRuntime(container.Runtime.Name) 
    if err != nil {
      return nil, err
    }
    _, err = rtime.Get(ctx, r.ContainerID)
    if err != nil && err != runtime.ErrTaskNotExists { 
        return nil, errdefs.ToGRPC(err)
    }
    if err == nil {
        return nil, errdefs.ToGRPC(fmt.Errorf(
                                                名稱欄目：Containerd深度剖析-CRI篇                                                

                                                文章位置：http://www.fisionsoft.com.cn/article/cooddsg.html